Guidelines extensible and liftable table Oplà Top for aluminum anodized stainless steel kitchen Emuca

Oplà Top is a hidden auxiliary table system extraction and rapid rise. Use of this system is oriented to the kitchen, with a simple gesture the table is placed at the same level of the top of the counter and getting an extension of the surface on which we are working.

The Oplà Top modules can be installed in 900 mm width and a minimum depth of 540 mm, it may be the space used by a drawer. The front of the cabinet after which the system is saved must have hinges for opening and allow removal. The guide system allowing the extraction of an area of 500 mm and a load capacity of 60 kg.

The guides are connected by a profile which gives greater stability to the assembly, if we mount the system in a module width of less than 900 mm, this profile will cut stabilizer to fit the required width. Moreover, the mechanism has springs which facilitate the lifting movement of the mechanism.

boards that make up the support surface or the front are not included.

Features of the guidelines:

• Removable and lift system to perform a work surface in kitchen environments, 500 mm in length.
• Valid for modules 900 mm wide, minimum depth of 540 mm and 60 kg capacity.
• These guides have a locking system when open to prevent inadvertent closure.
• screws for installation and assembly instruction sheet included.
• The profiles forming the guides are made of extruded aluminum and stainless anodized finish.

How to mount the guides?